FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD
FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD
FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD

FOSHAN FEROSTEEL CO., LTD
Position:
Homepage
/
/
/
Stainless Steel Processing Technology
Check category

News Center

Stainless Steel Processing Technology

  • Categories:FAQS
  • Author:Ferosteel
  • Origin:Ferosteel
  • Time of issue:2020-05-19 10:32
  • Views:

(Summary description)     Stainless steel processing refers to the process of cutting, folding, bending, welding and other mechanical processing of stainless steel according to the performance of stainless steel to finally obtain the stainless steel products required for industrial production. device. Stainless steel processing equipment is classified into shearing equipment and surface treatment equipment. The shearing equipment is divided into Kaiping equipment and slitting equipment. In addition, from the thickness of stainless steel, there are cold and hot rolling processing equipment. Thermal cutting equipment mainly includes plasma cutting, laser cutting, water cutting, etc. Stainless steel surface processing grade     Original surface: NO.1 surface treated with heat treatment and pickling after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industrial equipment, etc., the thickness is thicker from 2.0MM-8.0MM.     Blunt surface: NO.2D cold-rolled, heat-treated and pickled, the material is soft, the surface is silver-white gloss, used for deep drawing processing, such as automotive components, water pipes, etc. Matte surface: NO.2B after cold rolling, heat treatment and pickling, and then finish rolling to make the surface moderately bright. Due to the smooth surface, it is easy to regrind, making the surface brighter, and has a wide range of uses, such as tableware and building materials. After adopting the surface treatment with improved mechanical properties, it can satisfy almost all uses.     Coarse sand NO.3 is the product grinded with 100-120 No. grinding belt. It has better gloss and discontinuous rough lines. Used for interior and exterior decoration materials, electrical products and kitchen equipment.     Fine sand: NO.4 is the product grinded by the abrasive belt with the size of 150-180. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.3. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.     # 320 Grind the product with No. 320 grinding belt. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.4. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.     Wool surface HAIRLINE: HLNO.4 is a product with continuous grinding of polishing belt with appropriate particle size to produce abrasive patterns (subdivision No. 150-320). Mainly used for building decoration, elevators, building doors, panels, etc.     Bright surface: BA is cold-rolled and then brightly annealed and flattened. The surface gloss is excellent, with a high reflectivity. Like a mirror surface. Used in home appliances, mirrors, kitchen equipment, decorative materials, etc.

Stainless Steel Processing Technology

(Summary description)     Stainless steel processing refers to the process of cutting, folding, bending, welding and other mechanical processing of stainless steel according to the performance of stainless steel to finally obtain the stainless steel products required for industrial production. device. Stainless steel processing equipment is classified into shearing equipment and surface treatment equipment. The shearing equipment is divided into Kaiping equipment and slitting equipment. In addition, from the thickness of stainless steel, there are cold and hot rolling processing equipment. Thermal cutting equipment mainly includes plasma cutting, laser cutting, water cutting, etc.

Stainless steel surface processing grade

    Original surface: NO.1 surface treated with heat treatment and pickling after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industrial equipment, etc., the thickness is thicker from 2.0MM-8.0MM.

    Blunt surface: NO.2D cold-rolled, heat-treated and pickled, the material is soft, the surface is silver-white gloss, used for deep drawing processing, such as automotive components, water pipes, etc.

Matte surface: NO.2B after cold rolling, heat treatment and pickling, and then finish rolling to make the surface moderately bright. Due to the smooth surface, it is easy to regrind, making the surface brighter, and has a wide range of uses, such as tableware and building materials. After adopting the surface treatment with improved mechanical properties, it can satisfy almost all uses.

    Coarse sand NO.3 is the product grinded with 100-120 No. grinding belt. It has better gloss and discontinuous rough lines. Used for interior and exterior decoration materials, electrical products and kitchen equipment.

    Fine sand: NO.4 is the product grinded by the abrasive belt with the size of 150-180. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.3. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

    # 320 Grind the product with No. 320 grinding belt. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.4. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

    Wool surface HAIRLINE: HLNO.4 is a product with continuous grinding of polishing belt with appropriate particle size to produce abrasive patterns (subdivision No. 150-320). Mainly used for building decoration, elevators, building doors, panels, etc.

    Bright surface: BA is cold-rolled and then brightly annealed and flattened. The surface gloss is excellent, with a high reflectivity. Like a mirror surface. Used in home appliances, mirrors, kitchen equipment, decorative materials, etc.

  • Categories:FAQS
  • Author:Ferosteel
  • Origin:Ferosteel
  • Time of issue:2020-05-19 10:32
  • Views:
Information

     Stainless steel processing refers to the process of cutting, folding, bending, welding and other mechanical processing of stainless steel according to the performance of stainless steel to finally obtain the stainless steel products required for industrial production. device. Stainless steel processing equipment is classified into shearing equipment and surface treatment equipment. The shearing equipment is divided into Kaiping equipment and slitting equipment. In addition, from the thickness of stainless steel, there are cold and hot rolling processing equipment. Thermal cutting equipment mainly includes plasma cutting, laser cutting, water cutting, etc.

Stainless steel surface processing grade

    Original surface: NO.1 surface treated with heat treatment and pickling after hot rolling. Generally used for cold-rolled materials, industrial tanks, chemical industrial equipment, etc., the thickness is thicker from 2.0MM-8.0MM.

    Blunt surface: NO.2D cold-rolled, heat-treated and pickled, the material is soft, the surface is silver-white gloss, used for deep drawing processing, such as automotive components, water pipes, etc.

Matte surface: NO.2B after cold rolling, heat treatment and pickling, and then finish rolling to make the surface moderately bright. Due to the smooth surface, it is easy to regrind, making the surface brighter, and has a wide range of uses, such as tableware and building materials. After adopting the surface treatment with improved mechanical properties, it can satisfy almost all uses.

    Coarse sand NO.3 is the product grinded with 100-120 No. grinding belt. It has better gloss and discontinuous rough lines. Used for interior and exterior decoration materials, electrical products and kitchen equipment.

    Fine sand: NO.4 is the product grinded by the abrasive belt with the size of 150-180. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.3. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

    # 320 Grind the product with No. 320 grinding belt. It has better gloss, has discontinuous rough lines, and the stripes are finer than NO.4. Used in baths, interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

    Wool surface HAIRLINE: HLNO.4 is a product with continuous grinding of polishing belt with appropriate particle size to produce abrasive patterns (subdivision No. 150-320). Mainly used for building decoration, elevators, building doors, panels, etc.

    Bright surface: BA is cold-rolled and then brightly annealed and flattened. The surface gloss is excellent, with a high reflectivity. Like a mirror surface. Used in home appliances, mirrors, kitchen equipment, decorative materials, etc.

Keyword:

Scan the QR code to read on your phone

佛山市非若特钢业有限公司
搜索
Search

        0757-29822352

FOSHAN FEROSTEEL CO., LTD

Add:No.12 Central Road, Bijiao, Chencun, Shunde, Foshan, China