Vibration finish stainless steel sheet carries a dense, random cross-hatching — a "chaos" pattern with no grain direction. It's the default for elevator cabs and commercial wall cladding because in tight, high-touch spaces it hides fingerprints, shrugs off scuffs and never glares. Panels can be installed in any orientation, which is why elevator companies keep it in stock.



|
|
Elevator cabs
|
Wall cladding
|
|
Typical thickness
|
0.5 – 0.8 mm
|
0.6 – 1.0 mm (1.0–1.5 mm for traffic)
|
|
Grade
|
304 interior
|
304 interior; 316L for coastal/exterior
|
|
Panel size
|
Cut to cab dimensions, usually ≤ 1.5 m
|
Full sheets 1219×2438 or cut to module
|
|
Fixing
|
Bent and fixed to cab frame
|
Over subframe, clips or bonded to backer
|
|
Main concern
|
Fingerprints, glare, scuffs in a small box
|
Consistent tone over large area, joints
|
|
Common pairing
|
Mirror back panel + vibration walls
|
Plain wall, or paired with stone / wood
|
|
Sample approval
|
In cab lighting, 3000K warm
|
In corridor strip lighting, 4000K neutral
|
|
Parameter
|
Range
|
|
Grades
|
201 / 304 / 316L / 430
|
|
Thickness
|
0.5 – 1.5 mm for cabs and walls
|
|
Standard sizes
|
1000×2000 / 1219×2438 / 1219×3048 / 1500×3000 mm
|
|
Surface
|
Vibration / chaos / non-directional cross-hatch
|
|
PVD colour options
|
Natural silver, black, bronze, champagne, gold over vibration base
|
|
Thickness tolerance
|
±0.01 – 0.02 mm
|
|
Standards
|
AISI / JIS / GB
|
|
MOQ
|
30 sheets
|
|
Lead time
|
10–30 working days after deposit
|
|
Field
|
Example
|
|
Application
|
Elevator cab / Wall cladding
|
|
Grade
|
304 / 316L
|
|
Thickness
|
0.8 mm
|
|
Size
|
1219×2438 mm, or cut to drawing
|
|
Finish
|
Vibration / chaos non-directional
|
|
Color
|
Natural / PVD colour
|
|
Quantity
|
30 sheets / by m²
|
|
Destination
|
Port / city
|
Office address: 26 Floor, Shibo Financial Center, Fenjiang South Road No.38, Chancheng, Foshan, GuangDong, China
Phone
: +86 -18024913898
Email
: [email protected]
IPv6 network supported
leave a message