PVD (Physical Vapor Deposition) is a vacuum coating process that deposits a thin, hard metal layer onto stainless steel — producing gold, rose gold, black titanium, champagne, bronze and blue finishes that won't peel like paint.
PVD is more durable than electroplating and spraying: the coating bonds at the atomic level, is scratch- and corrosion-resistant, and holds its color for 10+ years indoors with routine care.
A premium but predictable finish choice for elevators, furniture and interior cladding — with color and durability far beyond what paint or plating can offer.
PVD stands for Physical Vapor Deposition — a family of vacuum coating technologies in which a solid metal source (titanium, chromium, zirconium, etc.) is vaporized and deposited onto the substrate as an ultra-thin film, typically 0.3–1 micron thick.
The most common commercial method for stainless steel decoration is magnetron sputtering: within a vacuum chamber, ions bombard the coating target, knocking atoms loose that then land on the stainless steel sheet and bond at the atomic level. The result is a dense, hard, uniform film — not a painted layer sitting on top, but a coating that behaves like part of the metal.
Compared to older processes (electroplating, chemical coloring, spraying), PVD stands out for three properties:
The practical takeaway: if the surface will be touched, scratched or seen up close — elevators, handrails, door panels, luxury furniture — PVD is the finish that holds up. Painted coatings fail exactly where PVD shines: on edges, corners and repeated contact.
Because the color comes from the coating itself (not a pigment layer), PVD colors don't fade the way paint does under UV — an important detail for sun-exposed entrances.
Q: What does PVD stand for?
A: Physical Vapor Deposition — a vacuum coating process that deposits a thin, hard metal film onto stainless steel, producing durable decorative colors that won't peel like paint.
Q: Is PVD coating better than electroplating?
A: For decorative stainless steel, generally yes: PVD bonds atomically, is harder and more scratch-resistant, gives more consistent color across batches, and is a cleaner dry process. Electroplating is cheaper but thinner in adhesion quality.
Q: How long does PVD color last on stainless steel?
A: Indoors with routine care, 10+ years. The coating resists fading and flaking, but abrasive cleaning or harsh chemicals will shorten its life.
Q: What colors are available with PVD?
A: Gold, rose gold, black titanium, champagne, bronze, blue and custom shades, reproducible across batches — ideal for elevators, furniture and architectural panels.
Q: Can PVD be applied to water ripple or embossed sheets?
A: Yes — textured sheets are commonly PVD-coated after embossing (e.g., pink medium water ripple with custom PVD finish). Confirm the coating follows the texture uniformly with a sample.
Office address: 26 Floor, Shibo Financial Center, Fenjiang South Road No.38, Chancheng, Foshan, GuangDong, China 
Phone
: +86 -18024913898
Email
: [email protected]
IPv6 network supported
leave a message
